How to setup a Sharp on a new network

1. From the home screen of the copier press the “Settings” option on the bottom of the screen.

2. On the right select “Administrator login” and input the password and select “Login”. The default password is “admin” if that doesn’t work please contact your administrator or IT department.

3. Select “System Settings” tab at the top and the “Quick Settings” tab to the left should already be selected. Scroll down to the “IPv4 Settings” and at the DCHP drop down select enable and then scroll to the top and select “Submit”.

As long as you have the ethernet cable connected and it is plugged into an active port it will pull a new IP address.

4. You will most likely need to setup new print drivers on your computers to match the new IP address. If that is the case you can follow the linked guides below.